The system is very stable and the material used is impact resistant to cope with the load when the concrete is vibrated to density.

Features

• Embedded pipe sets for casting into concrete
• Made of impact resistant ABS
• Conduit inlets also in steel and stainless steel

• Consisting of conduit inlets, adjusting pipes (length), pipe connectors (extreme length) and fixations to the casing
• Flanges on the conduit inlets act as a water barrier and fixation of the inlet in concrete
• Conduit inlets milled to exact dimensions of the SLIPSIL® plugs and rounded off to avoid any damage to the plugs during insertion
• Breakthrough – perfectly fitting conduit inlets
• The system of choice for creating conduit openings in the building industry!

SLIPSIL plugs

cause no mechanical stress and avoid corrosion problems. That offers owners buildings the possibility to save on maintenance costs.

The service life of the SLIPSIL plugs easily exceeds 20 years under normal environmental conditions. The plugs can be used in a very wide temperature range. Even at low temperatures down to -50° C the rubber stays flexible and does not harden excessively as other rubber types will do.

This guarantees tightness even at low temperatures. The rubber can also be used in applications up to +180° C. A single rubber grade is now capable of satisfying almost all sealing conditions.

Features

• Designed to provide fire safe, gas and watertight seals for pipe penetrations
• For transits carrying single or multiple metal pipes with the same diameter (hydraulic and pneumatic lines)
• Installs in a couple of minutes. Lubricate and push – that’s it!
• No bolting or other mechanical devices required
• Absorbs mechanical stresses, vibration and prevents galvanic corrosion problems
• Wide temperature range: -50 °C up to +180 °C
• Proven – simple installation, high performance
• The system of choice in the building industry worldwide for almost 4 decades!

The SLIPSIL – MPP

Sealing systems allows easy access for later extensions of the pipework or cables. Since the sealing system is based on the unique SLIPSIL installation methode, there is no bolting nor any other mechanical device required. The SLIPSIL – MPP modules offer a variety of configurations and are the ideal solution for underground ducting in concrete pits and foundations.

• building and construction industry
• (petro)chemicals industry
• energy companies
• water companies

Features

• Designed to provide a simple solution for both cable and pipe multi-penetrations
• For transits carrying a variety of pipes/cables with different diameters
• Installs in a couple of minutes. Lubricate and push – that is it!
• Easy access for later extensions
• No bolting or other mechanical devices required.
• Modules with various hole configurations, made of HMPE for watertight penetrations guaranteeing a long service life
• Breakthrough – most easy access for extensions
• The system of choice for underground ducting in concrete pits and foundations!

DYNATITE was specially developed for application in columns in semi-submersible offshore rigs, following incidents where traditional cable transit systems suffered catastrophic failure under high pressure.

Typical application:

• columns of offshore oil rigs
• environments where penetrations may be suddenly exposed to extreme conditions
• partitions between hazardous and non-hazardous areas
• blast walls
• explosion-proof areas
• regions with elevated hurricane and tsunami risks

Features

• For applications where a high degree of (instantaneous) tightness is required
• Dynamic sealing when a disaster occurs
• Plugs are compressible and will return to their original shape after shock pressure
• Easily withstands shock pressure loads up to 15 bar (220 psi)
• Ideal solution for cable and pipe transits in subsea and explosion proof installations
• Breakthrough – dynamic compression
• Based on high-tech rubber grade and engineered profiling, the DYNATITE® plugs can be substantially compressed and get tighter with excessive pressure

The RISWAT system

is used to provide water and gas tight seals for transit openings carrying multiple cables and for ducting pipes that have to be able to move in all directions. The system, which requires relatively little space to install, is suitable for the sealing of both new and existing transit openings.

 

Type application:

• Building construction
• Renovation
• Energy works
• Utility companies
• Water and waste water industry

Features

• The system of choice worldwide to replace leaking conduits in a most efficient way
• The system is suitable for existing cable and pipe penetrations
• DRIFIL® sealant has a high bonding strength
• Can be applied in concrete or brick walls
• No conduit frames or sleeves necessary
• Limited amount of structural components: RISWAT® insert and filler sleeves and DRIFIL® sealant
• Proven – thousands of leaking conduits sealed with RISWAT® all over the world
• The system technology is identical to the RISE® and NOFIRNO® sealing systems

NOFIRNO is fire safe

As well as gas and water tight systems. The system is approved for the harshest fire ratings for pipe penetrations (A, H and Jet Fire class) and allows substantial movement of the ducted pipe within the conduit.

The high pressure

Ratings allow the system to be used for gas and/or watertight penetrations as well. To obtain the required watertightness no compression is needed. The system has no metal parts thus avoiding corrosion on the pipe work. The perfect sealing of the NOFIRNO sealant also avoids (invisible) corrosion within the penetration.

Typical application areas

• Building and construction
• Renovation
• Other environments where the safety of people and installations has to be guaranteed.

Features

• Approved for harshest fire ratings for pipe penetrations (EN, A, H and Jet Fire class)
• Allows substantial movement of the ducted pipe within the conduit
• High pressure ratings – designed for gas and/or watertight penetrations
• Prevents corrosion inside the penetration
• Longest service life and best Total Cost of Ownership on the market
  NOFIRNO® rubber sleeves and sealant will remain stable and not be consumed by fire
• Breakthrough – MULTI-ALL-MIX® SYSTEM
• Approved for any combination of cable and/or metallic, GRP or plastic pipes!

Moreover

NOFIRNO is extemely simple to install. The minimized number of components and the approval for use in concrete, steel and aluminium partitions allow you to save on stocks and material handling. Sealing your penetrations with NOFIRNO means therefore saving time ánd money!

The system’s application areas are:

• hipsbuilding
• offshore installations
• building and construction industry
• many, many other environments where the safety of people and installations has to be guaranteed.

Features

• For fire, gas, smoke and watertight sealing of multi-cable penetrations
• Compact system. No precise fitting parts
• No metal parts, no corrosion
• Most cost-effective way of installation
• No pre-engineering or special conduit frames
• No restrictions on cable types and sizes, no insulation in front of the penetration needed
• Re-entry for cable modifications is simple
• Approved for harshest fire ratings for multi-cable penetrations (EN, A, H and Jet Fire class)
• Breakthrough – bundled cable sets approved
• The system of choice for highest fire ratings and harshest environment!

ACTIFOAM multi-cable

Transit sealing system is available as ACTIFOAM filler sheets and ACTIFOAM slit filler sheets. The oxygen index of ACTIFOAM is 40% (>30% is flame retardant).

An advantage of the ACTIFOAM material is that is does not absorb water. Tested at 2.5 bar water pressure during 24 hours. The K value at 10 °C according to NEN-EN 12667 is 12.3 mk/W.

The density of the foam rubber at 23 °C is between 0.35 and 0.4 g/cm³, in accordance with ISO 2781. Compression set of the foam rubber is 14% which stands for a good “memory”. Good weathering, UV and ozone resistance. Temperature range from -15 °C to +70 °C.

Typical application areas are:

• fire resistant ducting of cables (cavity seals)
• fire resistant ducting of busbar systems (busbar cavity seals)
• fire resistant ducting of cables and/or cable trays through wall and floor penetrations (FIRSTO Firestop)
• temporary fire resistant sealing of penetration openings during construction work (temporary seals)
• fire resistant sealing of doors and hatches
• fire resistant and thermal protection of installations

-40°C to +180°C

Features

• Designed to provide a simple solution for both new and existing cable penetrations.
• Cellular rubber with closed cell structure to prevent moisture absorption.
• Rubber is activated and expanding when exposed to flames or extensive heat.
• Self-correcting fire stop system.
• EN certified for a two hour fire rating.
• Adding or removing cables an easy matter.
• Front of the sealing system can be covered with FIWA® or NOFIRNO® sealant for outdoor use.
• Proven – simple installation (sheets and slit sheets).
• The system of choice for upgrading existing cable penetrations.

The FIRSTO system features the following advantages

• Designed to provide a simple solution for both new and existing cable penetrations
• Cellular rubber with closed cell structure to prevent moisture absorption
• Rubber is activated and expanding when exposed to flames or extensive heat
• Self-correcting fire stop system
• EN certified for a two hour fire rating
• Adding or removing cables an easy matter
• Front of the sealing system can be covered with FIWA® or NOFIRNO® sealant for outdoor use
• Proven – modular casings to fit to cable ways
• The system of choice for installations with continous changes in the cable set

FIRSTO is specifically suitable

for the fire resistant ducting of cables and/or cable trays through wall and floor penetrations. No other firestop can offer the high level of security with the flexibility, time and cost savings and highest quality standard that FIRSTO offers.

Main application areas are:

• Petrochemical industry
• Telecom and computer industry
• Any work area where cable maintenance and frequent changes may be necessary.

Mineral wool boards

Are coated with a layer of NOFIRNO on one or both sides. In case of fire the NOFIRNO coating will form a ceramic protective shield at the exposed side. This shield is also a thermal barrier.

Furthermore it prevents moisture from escaping from the inside of the mineral wool board so that no shrinkage will occur during fire exposure. NOFIRNO coating is water resistant.

Application aresas:

• Building and constructions
• RenovationTransport industry
• Utilities works
• Telecom and IT industry

Features

• Designed to provide a fire safe sealing solution for upgrading existing installations
• Combination of ACTIFOAM® rubber and NOFIRNO® boards, especially for oversized penetrations
• Cellular rubber with closed cell structure to prevent moisture absorption
• Rubber is activated and expanding when exposed to flames or extensive heat
• NOFIRNO® coating prevents shrinking of mineral wool board. Not moisture sensitive
• Breakthrough – coating which forms a ceramic shield when exposed to fire, preventing shrinkage
• The system of choice for replacing intumescent sealing systems