PRESSURE COEFFICIENT % OF PN
Stainless Steel L SOL 5
FOR HIGH PRESSURES UP TO 400 BAR
- Unions, valves
- Ø 6 – 18 mm
- max. 400 bar
- -110°C to +300°C
- for aggressive air, gases, liquids and oils in an aggressive environment
- e.g. in semiconductors, off-shore, CNG, pharmaceuticals + biotechnology
APPLICATION
- semiconductors
- on/offshore
- fuel cells
- biotechnology and pharmaceuticals
CHARACTERISTICS/SPECIFICATIONS
- high pressure resistance
- easy, robust assembly due to tightening limitation
- corrosion resistant
- compact design
- radial dismounting
- minimal dead space
- very good resistance to vibration
MATERIAL
Stainless steel 1.4571 with the alloy X 6 CrNiMoTi 17 12 2, DIN EN 10216-5 (≈ AISI 316 Ti).
NOMINAL PRESSURE PN (STAT.)
200-400 bar; for details, see product tables (safety factor 4)
TEMPERATURE RANGE
-110°C to +300°C
LEAK RATE WITH HELIUM
10-8 mbar • l/s
(when professionally assembed; see installation instructions and tubes)
VACUUM
10-6 mbar
TUBES TO USE
Plastic tubes and stainless steel tubes, seamless, cold drawn, de-scaled (DIN 17458), tolerances per DIN EN 10216-5, max. hardness: 185 HV(HRB90), for more information, see appendix
CERTIFICATES
2.2 per EN 10204 , incl. materials specification
APPROVALS
DVGW-Gas, SVGW-Gas, ECE/324/Reg.110 “Uniform provision concerning the approval of specific components of motor vehicles using compressed natural gas (cng) in their propulsion system”
ADAPTOR STEM, THREADS
British Standard Pipe (BSP) and metric fine thread DIN 3852. Tapered form C, parallel form B. Thread with sealing form E. NPT-thread according to ANSI/ASME B1.20.1-1983. UNF/UN threads in accordance with SAE 514.